Cycling Stability Research Articles

Electric Double Layer Regulator Design through a Functional Group Assembly Strategy towards Long-lasting Zinc Metal Batteries.

Regulating the electric double layer (EDL) structure of the zinc metal anode by using electrolyte additives is an efficient way to suppress interface side reactions and facilitate uniform zinc deposition. Nevertheless, there are no reports investigating the proactive design of EDL-regulating additives before the start of experiments. Herein, a functional group assembly strategy is proposed to design electrolyte additives for modulating the EDL, thereby realizing a long-lasting zinc metal anode. Specifically, by screening ten common functional groups, N, N-dimethyl-1H-imidazole-1-sulfonamide (IS) is designed by assembling an imidazole group, characterized by its high adsorption capability on the zinc anode, and a sulfone group, which exhibits strong binding with Zn2+ ions. Benefiting from the adsorption functionalization of the imidazole group, the IS molecules occupy the position of H2O in the inner Helmholtz layer of the EDL, forming a molecular protective layer to inhibit H2O-induced side reactions. Meanwhile, the sulfone group in IS, acting as a binding site to Zn2+, promotes the de-solvation of Zn2+ ions, facilitating compact zinc deposition. Consequently, the utilization of IS significantly extending the cycling stability of Zn||Zn and Zn||NaV3O8·1.5H2O full cell. This study offers an innovative approach to the design of EDL regulators for high-performance zinc metal batteries.

Carbon/C3N4 heterostructures constructed from lignin toward enhanced lithium-ion storage

Lithium-ion batteries (LIBs) are widely used in portable energy storage. The capacity of commercial graphite is difficult to improve due to the stoichiometry limit of LiC6 of graphite, thus new anodes need to be developed to meet the demand of high-energy–density LIB. The growing interest in graphitized carbon nitride (g-C3N4) stems from its structural resemblance to graphite and its capacity to offer abundant adsorption and intercalation sites. However, g-C3N4, as a semiconductor, has a low lithium transfer rate due to its poor conductivity and high diffusion resistance. Improving the electron transport rate of g-C3N4 and reducing the adsorption energy barrier of Li+ in g-C3N4 are the keys to improving the electrochemical performances of g-C3N4. In this study, lignin and melamine were homogeneously mixed using the spray drying method, followed by the preparation of covalently bonded C3N4/LC material through a one-step carbonization process. The uniform dispersion of g-C3N4 in amorphous carbon can improve the conductivity and reduce the diffusion energy barrier of Li+. As a result, the C3N4/LC-x anode has better electrochemical behavior, including higher reversible capacity, better rate performance, and cycle stability.

Achieving a Deeply Desodiated Stabilized Cathode Material by the High Entropy Strategy for Sodium-ion Batteries.

Manganese-based layered oxides are currently of significant interest as cathode materials for sodium-ion batteries due to their low toxicity and high specific capacity. However, the practical applications are impeded by sluggish intrinsic Na+ migration and poor structure stability as a result of Jahn-Teller distortion and complicated phase transition. In this study, a high-entropy strategy is proposed to enhance the high-voltage capacity and cycling stability. The designed P2-Na0.67Mn0.6Cu0.08Ni0.09Fe0.18Ti0.05O2 achieves a deeply desodiation and delivers charging capacity of 158.1 mA h g-1 corresponding to 0.61 Na with a high initial Coulombic efficiency of 98.2%. The charge compensation is attributed to the cationic and anionic redox reactions conjunctively. Moreover, the crystal structure is effectively stabilized, leading to a slight variation of lattice parameters. This research carries implications for the expedited development of low-cost, high-energy-density cathode materials for sodium-ion batteries.

Nonflammable Succinonitrile-Based Deep Eutectic Electrolyte for Intrinsically Safe High-Voltage Sodium-Ion Batteries.

Intrinsically safe sodium-ion batteries are considered as a promising candidate for large-scale energy storage systems. However, the high flammability of conventional electrolytes may pose serious safety threats and even explosions. Herein, a strategy of constructing a deep eutectic electrolyte is proposed to boost the safety and electrochemical performance of succinonitrile (SN)-based electrolyte. The strong hydrogen bond between S═O of 1,3,2-dioxathiolane-2,2-dioxide (DTD) and the α-H of SN endows the enhanced safety and compatibility of SN with Lewis bases. Meanwhile, the DTD participates in the inner Na+ sheath and weakens the coordination number of SN. The unique solvation configuration promotes the formation of robust gradient inorganic-rich electrode-electrolyte interphase, and merits stable cycling of half-cells in a wide temperature range, with a capacity retention of 82.8% after 800 cycles (25°C) and 86.3% after 100 cycles (60°C). Correspondingly, the full cells deliver tremendous improvement in cycling stability and rate performance.

Engineering a Low-Strain Si@TiSi2@NC Composites for High-Performance Lithium-Ion Batteries.

The huge volume expansion/contraction of silicon (Si) during the lithium (Li) insertion/extraction process, which can lead to cracking and pulverization, poses a substantial impediment to its practical implementation in lithium-ion batteries (LIBs). The development of low-strain Si-based composite materials is imperative to address the challenges associated with Si anodes. In this study, we have engineered a TiSi2 interface on the surface of Si particles via a high-temperature calcination process, followed by the introduction of an outermost carbon (C) shell, leading to the construction of a low-strain and highly stable Si@TiSi2@NC composite. The robust TiSi2 interface not only enhances electrical and ionic transport but also, more critically, significantly mitigates particle cracking by restraining the stress/strain induced by volumetric variations, thus alleviating pulverization during the lithiation/delithiation process. As a result, the as-fabricated Si@TiSi2@NC electrode exhibits a high initial reversible capacity (2172.7 mAh g-1 at 0.2 A g-1), superior rate performance (1198.4 mAh g-1 at 2.0 A g-1), and excellent long-term cycling stability (847.0 mAh g-1 after 1000 cycles at 2.0 A g-1). Upon pairing with LiNi0.6Co0.2Mn0.2O2 (NCM622), the assembled Si@TiSi2@NC||NCM622 pouch-type full cell exhibits exceptional cycling stability, retaining 90.1% of its capacity after 160 cycles at 0.5 C.

Bioinspired H-Bonding Connected Gradient Nanostructure Actuators Based on Cellulose Nanofibrils and Graphene.

The construction of flexible actuators with ultra-fast actuation and robust mechanical properties is crucial for soft robotics and smart devices, but still remains a challenge. Inspired by the unique mechanism of pinecones dispersing seeds in nature, a hygroscopic actuator with interlayer network-bonding connected gradient structure is fabricated. Unlike most conventional bilayer actuator designs, the strategy leverages biobased polyphenols to construct strong interfacial H-bonding networks between 1D cellulose nanofibers and 2D graphene oxide, endowing the materials with high tensile strength (172MPa) and excellent toughness (6.64MJm-3). Furthermore, the significant difference in hydrophilicity between GO and rGO, along with the dense interlayer H-bonding, enables ultra-fast water exchange during water absorption and desorption processes. The resulted actuator exhibits ultra-fast driving speed (154°s-1), excellent pressure-resistant and cyclic stability. Taking advantages of these benefits, the actuator can be fabricated into smart devices (such as smart grippers, humidity control switches) with significant potential for practical applications. The presented approach to constructing interlayer H-bonding in gradient structures is instructive for achieving high performance and functionalization of biomass nanomaterials and the complex of 1D/2D nanomaterials.

Nanostructured S@VACNTs Cathode with Lithium Sulfate Barrier Layer for Exceptionally Stable Cycling in Lithium-Sulfur Batteries

Nanostructured S@VACNTs Cathode with Lithium Sulfate Barrier Layer for Exceptionally Stable Cycling in Lithium-Sulfur Batteries

Glycerol Triacetate-Based Flame Retardant High-Temperature Electrolyte for the Lithium-Ion Battery.

Rechargeable batteries that can operate at elevated temperatures (>70 °C) with high energy density are long-awaited for industrial applications including mining, grid stabilization, naval, aerospace, and medical devices. However, the safety, cycle life, energy density, and cost of the available high-temperature battery technologies remain an obstacle primarily owing to the limited electrolyte options available. We introduce a flame-retardant electrolyte that can enable stable battery cycling at 100 °C by incorporating triacetin into the electrolyte system. Triacetin has excellent chemical stability with lithium metal, and conventional cathode materials can effectively reduce parasitic reactions and promises a good battery performance at elevated temperatures. Our findings reveal that Li-metal half-cells can be made that have high energy density, high Coulombic efficiency, and good cycle life with triacetin-based electrolytes and three different cathode chemistries. Moreover, the nail penetration test in a commercial-scale pouch battery using this new electrolyte demonstrated suppressed heat generation when the cell was damaged and excellent safety when using the triacetin-based electrolyte.

Scalable Customization of Crystallographic Plane Controllable Lithium Metal Anodes for Ultralong-Lasting Lithium Metal Batteries.

A formidable challenge to achieve the practical applications of rechargeable lithium (Li) metal batteries (RLMBs) is to suppress the uncontrollable growth of Li dendrites. One of the most effective solutions is to fabricate Li metal anodes with specific crystal plane, but still lack of a simple and high-efficient approach. Herein, to overcome this key challenge, we report a facile and controllable way for the scalable customization of polished Li metal anodes with highly preferred (110) and (200) crystallographic orientation (donating as polished Li(110) and polished Li(200), respectively) by regulating the times of accumulative roll bonding at room temperature. In light of the inherent characteristics of polished Li(110) and polished Li(200), the influence of Li atomic structure on the electrochemical performance of RLMBs is deeply elucidated by combining theoretical calculations with relative experimental proofs. In particular, polished Li(110) crystal plane is demonstrated to induce Li+ uniform deposition, promoting the formation of flat and dense Li deposits. Impressively, the polished Li(110)||LiFePO4 full cells exhibit unprecedented cycling stability with 10000 cycles at 10 C almost without capacity degradation, indicating the great potential application prospect of such textured Li metal. More valuably, this work provides an important reference for low-cost, continued, and large-scale production of Li metal anodes with highly preferred crystal orientation through roll-to-roll manufacturability. This article is protected by copyright. All rights reserved.

Full color control and patterned display device from cyan/magenta/yellow water-dispersed electrochromic polymer nanoparticles systems.

Electrochromic polymers (ECPs) have great application potential in flexible displays, and there is an increasing expectation of using green methods to form ECP films. Herein, we propose a modified microemulsion method to prepare Cyan/Magenta/Yellow (C/M/Y) water-dispersed electrochromic polymer nanoparticles systems. Three polymer films (WDECP-C/M/Y) maintain similar electrochemical properties compared to their corresponding organic solvent-based polymer films. It is intriguing that WDECP-C/M/Y exhibit better electrochromic properties in terms of higher cycling stability (97.24%, 95.05%, and 52.84%, respectively) and faster switching time (0.94 s, 1.09 s, and 1.34 s for coloring time, respectively) due to the introduction of nanoparticles. In addition, it can achieve various desired colors by blending the C/M/Y water-dispersed electrochromic polymer nanoparticles systems in different ratios. The calculated chromaticity coordinates of the blending polymer films show close values to the experimental observation, and the calculated ΔE*ab values range from 2.6 to 10.3, which may provide theoretical guidance for precisely color control. Finally, large-scale and patterned devices were assembled, which can achieve colored-to-colorless reversible electrochromism at a low driving voltage of 0 to 1.5 V. This work puts forward a universal and environmentally sustainable strategy to prepare water-dispersed electrochromic polymer nanoparticles systems, demonstrating their wide range of applications in display devices and electronic tags.

A fast-charging/discharging and long-term stable artificial electrode enabled by space charge storage mechanism

Lithium‐ion batteries with fast-charging/discharging properties are urgently needed for the mass adoption of electric vehicles. Here, we show that fast charging/discharging, long-term stable and high energy charge-storage properties can be realized in an artificial electrode made from a mixed electronic/ionic conductor material (Fe/LixM, where M = O, F, S, N) enabled by a space charge principle. Particularly, the Fe/Li2O electrode is able to be charged/discharged to 126 mAh g−1 in 6 s at a high current density of up to 50 A g−1, and it also shows stable cycling performance for 30,000 cycles at a current density of 10 A g−1, with a mass-loading of ~2.5 mg cm−2 of the electrode materials. This study demonstrates the critical role of the space charge storage mechanism in advancing electrochemical energy storage and provides an unconventional perspective for designing high-performance anode materials for lithium-ion batteries.

Mg-Composition Dependent Cycle Stability in Zn<sub>1-x</sub>Mg<sub>x</sub>O Li-ion Battery: Transition from Electronic Transport-Limited to Ionic Transport Limited Cycles

This study explores Mg-composition dependent cycle stability in a Zn<sub>1-x</sub>Mg<sub>x</sub>O Li-ion battery, where battery cycles transition from an electronic transport-limited to an ionic transport limited regime. We investigated the impact of Mg doping in Zn<sub>1-x</sub>Mg<sub>x</sub>O nanocrystals on Li-ion battery performance, focusing on Mg compositions between x=0.05 and x=0.15. Mg composition dependent structural and electrical properties were explored using field effect transistors (FETs) and various microscopic/spectroscopic methods. The electronic conductivity was found to be sensitive to changes in Mg composition. Consistently, the initial capacity decreased with an increase in Mg composition, aligning with the reduction in electronic conductivity due to Mg doping. However, with successive cycles, the capacity became independent of the electronic conductivity, an outcome attributed to the formation of a solid-electrolyte interphase (SEI) and the conversion reactions. Initially, Mg doping reduces electronic conductivity due to increased carrier trapping, leading to lower discharge capacity. However, as cycling progresses, the impact of Mg doping diminishes. The formation of the SEI layer becomes more influential, significantly affecting Li-ion transport. Over time, factors like SEI formation, conversion reaction dynamics, and structural changes within the electrode start to dominate the battery's capacity, rather than the initial electronic conductivity influenced by Mg doping. This understanding can guide the development of materials with lower resistance, facilitating faster charging and discharging rates. More importantly, this study indicates that the initial capacity is closely tied to the conductivity of the Zn<sub>1-x</sub>Mg<sub>x</sub>O material.

Review on performance optimization of Lithium Sulphur Batteries (LiSBs) using carbon based electrodes

Presently, researchers’ and experts are currently dealing with ways to maintain and improve the best performance of several energy storage technologies. This review focuses on how adding carbon derivatives to lithium sulfur battery (LiSBs) electrodes can reduce capacity fade, resistance, breakdown and poor performance while also enabling the best possible use of LiSBs in a variety of devices. Their rate as regards specific capacitance, energy and power densities, life duration, lightweight, etc., are among these optimal performances. The global energy crisis focused more scientists’ attention on how to enhance the performance of LiSBs devices for the benefit of humanity. Numerous carbon derivatives, including GO, rGO, carbon nanotubes (CNTs), etc., have advantageous properties that raise the efficiency of energy storage technologies. This review looked at LiSBs and the impact of carbon derivatives addition on their storage capability, cycle stability, life span and durability.

Reconstructing Solvation Structure by Steric Hindrance‐Coordination Push‐Pull of Dipolymer‐H2O‐Zn2+ toward Long‐life Aqueous Zinc‐Metal Batteries

Aqueous zinc‐metal batteries are prospective energy storge devices due to their intrinsically high safety and cost effectiveness. Yet, uneven deposition of zinc ions in electrochemical reduction and side reactions at the anode interface significantly hinder their development and application. Here, we propose a solvation‐interface attenuation strategy enabled by a frustrated tertiary amine amphiphilic dipolymer electrolyte additive. The configuration of superhydrophilic segments with covalently bonded lipophilic spacers enables coupled steric hindrance/coordination, which establishes a balanced push‐pull dynamic of dipolymer‐H2O‐Zn2+. Such interplay reconstructs the solvation structure of Zn2+ and allows the formation of a stable dipolymer‐inorganic hybrid solid electrolyte interface (SEI) layer. This SEI layer effectively shields the zinc‐metal anode from water and anions, significantly reducing side reactions. In addition, the dipolymer adsorbed at the zinc‐metal anode interface regulates the interfacial electrochemical reduction kinetics and ensures uniform zinc deposition. As a result, the Zn‐Zn symmetric cells with dipolymer‐containing electrolyte exhibit remarkable cycling stability exceeding 5800 h (242 days). The Zn‐NVO batteries and Zn‐AC hybrid ion supercapacitors also deliver stable cycling for up to 1440 h (60 days) with high‐capacity retention over 80%. This research demonstrates the potential to facilitate the development and commercialization of zinc‐based energy storage devices.

Graphene oxide–lithium-ion batteries: inauguration of an era in energy storage technology

Abstract A significant driving force behind the brisk research on rechargeable batteries, particularly lithium-ion batteries (LiBs) in high-performance applications, is the development of portable devices and electric vehicles. Carbon-based materials, which have finite specific capacity, make up the anodes of LiBs. Many attempts are being made to produce novel nanostructured composite anode materials for LiBs that display cycle stability that is superior to that of graphite using graphene oxide. Therefore, using significant amounts of waste graphene oxide from used LiBs represents a fantastic opportunity to engage in waste management and circular economy. This review outlines recent studies, developments and the current advancement of graphene oxide-based LiBs, including preparation of graphene oxide and utilization in LiBs, particularly from the perspective of energy storage technology, which has drawn more and more attention to creating high-performance electrode systems.

High Capacity and Fast Kinetics Enabled by Metal-Doping in Prussian Blue Analogue Cathodes for Sodium-Ion Batteries.

Prussian blue analogues (PBAs) have gained tremendous attention as promising low-cost electrochemically-tunable electrode materials, which can accommodate large Na+ ions with attractive specific capacity and charge-discharge kinetics. However, poor cycling stability caused by lattice strain and volume change remains to be improved. Herein, metal-doping strategy has been demonstrated in FeNiHCF, Na1.40Fe0.90Ni0.10[Fe(CN)6]0.85·1.3H2O, delivering a capacity as high as 148 mAh g‒1 at 10 mA g‒1. At an exceptionally high rate of 25.6 A g‒1, a reversible capacity of ~55 mAh g‒1 still can be obtained with a very small capacity decay rate of 0.02% per cycle for 1000 cycles, considered one of the best among all metal-doped PBAs. This exhibits the stabilizing effect of Ni doping which enhances structural stability and long-term cyclability. In situ synchrotron X-ray diffraction reveals an extremely small (~1%) change in unit cell parameters. The Ni substitution is found to increase the electronic conductivity and redox activity, especially at the low-spin (LS) Fe center due to inductive effect. This larger capacity contribution from LS Fe2+C6/Fe3+C6 redox couple is responsible for stable high-rate capability of FeNiHCF. The insight gained in this work may pave the way for the design of other high-performance electrode materials for sustainable sodium-ion batteries.

Synthesis and characterization of polyaniline-based composites using cellulose nanocrystals as biological templates.

Polyaniline (PANI) is considered as an ideal electrode material due to its remarkable Faradaic activity, exceptional conductivity, and ease of processing. However, the agglomeration and poor cycling stability of PANI largely limit its practical utilization in energy storage devices. To address these challenges, PANI was synthesized via a facile one-pot, two-step process using cellulose nanocrystals (CNCs) as bio-templates in this work. Zeta potential and particle size measurements revealed that the CNC template could impart improved dispersion stability to the synthesized PANI, which exhibited a decrease in average particle size from 1100 nm to 300 nm as a function of 10 % CNCs. Furthermore, the effect of CNC loadings on the performance of PANI was systematically investigated. The results showed that the specific capacitance of PANI/CNC increased from 102.52 F·g-1 to 138.12 F·g-1 with the CNC loading increase from 0 to 10 wt%. Particularly, the PANI/CNC composite film with a 1:9 ratio (C-P-10 %) demonstrated a capacity retention of 84.45 % after 6000 cycles and an outstanding conductivity of 526 S·m-1. This work generally offers an effective solution for the preparation of high-performance PANI-based composites, which might hold great promise in energy storage device applications.

Reconstructing Solvation Structure by Steric Hindrance-Coordination Push-Pull of Dipolymer-H2O-Zn2+ toward Long-life Aqueous Zinc-Metal Batteries.

Aqueous zinc-metal batteries are prospective energy storge devices due to their intrinsically high safety and cost effectiveness. Yet, uneven deposition of zinc ions in electrochemical reduction and side reactions at the anode interface significantly hinder their development and application. Here, we propose a solvation-interface attenuation strategy enabled by a frustrated tertiary amine amphiphilic dipolymer electrolyte additive. The configuration of superhydrophilic segments with covalently bonded lipophilic spacers enables coupled steric hindrance/coordination, which establishes a balanced push-pull dynamic of dipolymer-H2O-Zn2+. Such interplay reconstructs the solvation structure of Zn2+ and allows the formation of a stable dipolymer-inorganic hybrid solid electrolyte interface (SEI) layer. This SEI layer effectively shields the zinc-metal anode from water and anions, significantly reducing side reactions. In addition, the dipolymer adsorbed at the zinc-metal anode interface regulates the interfacial electrochemical reduction kinetics and ensures uniform zinc deposition. As a result, the Zn-Zn symmetric cells with dipolymer-containing electrolyte exhibit remarkable cycling stability exceeding 5800 h (242 days). The Zn-NVO batteries and Zn-AC hybrid ion supercapacitors also deliver stable cycling for up to 1440 h (60 days) with high-capacity retention over 80%. This research demonstrates the potential to facilitate the development and commercialization of zinc-based energy storage devices.

Manufacturing Shape-Controllable Flexible PEDOT/rGO Composite Electrodes for Planar Micro-Supercapacitors

Flexible electronic products, with their characteristics of flexibility and wearability, have attracted significant attention and have become an important direction in the research and development of the electronics industry. Planar micro-supercapacitors (MSCs) with flexible composite electrodes can provide reliable energy support for these products, propelling their further development. The research employed a quick, effective, and environmentally friendly method of laser scribing to create shape-controllable flexible composite electrodes on composite films of Poly(3,4-ethylenedioxythiophene) and graphene oxide (PEDOT/GO), which were subsequently assembled into MSCs. An analysis of the composite electrode morphology, structure, and elemental distribution was conducted through the utilization of SEM, TEM, and XPS techniques. Following this, a comprehensive evaluation of the electrochemical performance of the flexible MSCs was carried out, which included cyclic voltammetry (CV), galvanostatic charge/discharge (GCD), and assessment of cyclic stability. The analysis of the CV results indicated that the MSCs achieved the areal capacitance of 5.78 mF/cm2 at 5 mV/s. After 5000 cycles at a current density of 0.05 mA/cm2, the capacitance retention rate was 85.4%. The high areal capacitance and strong cycle stability of MSCs highlight the potential of PEDOT/reduced graphene oxide (PEDOT/rGO) electrodes in electrode applications.

A Cu/MnOx Composite with Copper-Doping-Induced Oxygen Vacancies as a Cathode for Aqueous Zinc-Ion Batteries.

Aqueous zinc-ion batteries are anticipated to be the next generation of important energy storage devices to replace lithium-ion batteries due to the ongoing use of lithium resources and the safety hazards associated with organic electrolytes in lithium-ion batteries. Manganese-based compounds, including MnOx materials, have prominent places among the many zinc-ion battery cathode materials. Additionally, Cu doping can cause the creation of an oxygen vacancy, which increases the material's internal electric field and enhances cycle stability. MnOx also has great cyclic stability and promotes ion transport. At a current density of 0.2 A g-1, the Cu/MnOx nanocomposite obtained a high specific capacitance of 304.4 mAh g-1. In addition, Cu/MnOx nanocomposites showed A high specific capacity of 198.9 mAh g-1 after 1000 cycles at a current density of 0.5 A g-1. Therefore, Cu/MnOx nanocomposites are expected to be a strong contender for the next generation of zinc-ion battery cathode materials in high energy density storage systems.